Skip to main navigation Skip to main content

This site uses cookies

We use cookies and other tracking technologies to improve your browsing experience on our website.
  • Home
  • Projects
  • Sustainable Recycled Winery Water Irrigation based on Treatment Fit for Purpose Approach
Back
Contemporary

Sustainable Recycled Winery Water Irrigation based on Treatment Fit for Purpose Approach

This page contains information about our current research projects and programs, reports from our completed projects, and tells you how to access our funding and report back to us if you are funded. Browse the listing or search for particular topics.

CSL 1002 final report
Download
PDF 4.4MB

Overview

The report sets indicative thresholds for using winery wastewater: ethanol below 0.1% (1 g/L), catechin and gallic acid at 1 mg/kg and coumaric acid at 0.3 mg/kg. Wastewater below 3.5 dS/m salinity caused no grapevine toxicity in glasshouse and Barossa Valley paired-site trials, and Shiraz wines from wastewater-irrigated grapevines showed no significant sensory difference. Indicative safe levels for grapevines were sodium below 460 mg/L and potassium below 1250 mg/L. Tables set application limits by slope, landform, drainage and soil properties, and structural risk thresholds for different soil types.

A dramatic increase in wine production over the last two decades in Australia and other wine producing countries has led to a corresponding increase in winery wastewater production. Sustainable management of winery wastewater has therefore become a priority to address environmental concerns. The end use of the wastewater is the most important factor to consider when deciding on treatment options. The best choice of management of the wastewater prior to disposal will depend on consideration of critical issues such as: chemical oxygen demand (COD), quality of the winery wastewater (including pH, Na, K levels) and Federal/State regulations, amongst others. Any treatment must be ‘fit for purpose’. If wastewater could be rapidly used for irrigation, only minimal treatment may be required – that treatment may be filtration, pH adjustment and potentially shandying to dilute salt load. However if it is necessary to store the wastewater near an urban area, it may be necessary to reduce BOD/COD in order to control odour. Guideline values for key indicators of recycled winery wastewater quality for on-site and off-site disposal were developed during this investigation that focus on the balance between adequate treatment with its associated costs and rapid disposal through irrigation with its inherent risk of odour production.

Abstract

A dramatic increase in wine production over the last two decades in Australia and other wine producing countries has led to the need for sustainable management of winery wastewater to meet environmental concerns. The end use of the winery wastewater is the most important factor to consider when deciding on treatment options. The best choice will include consideration of critical issues such as: chemical oxygen demand (COD), quality of the wastewater (including pH, Na and K levels) and Federal/State regulations, amongst others. Any treatment must be ‘fit for purpose’. If wastewater could be rapidly used for irrigation, only minimal treatment (e.g. dilution of salts by shandying the winery wastewater) may be required. However, if it is necessary to reduce the BOD/COD to control odour a balance needs to be found between an adequate level of treatment and storage of wastewater (that may cause an odour nuisance) versus the cheaper option of rapid disposal on the land through irrigation. Guideline values for key indicators of recycled winery wastewater quality for on-site and off-site disposal were developed during this investigation.

Member content

This content is restricted to wine exporters and levy payers.

Reports are also available for one-off purchase to non-members.

Click here to find out more.